Name: Loafmora Weighted Cake Turntable - Bring the next side of the cake to your hand.
Brand: loafmora
Availability: OutOfStock

Loafmora Weighted Cake Turntable - Bring the next side of the cake to your hand.

$0.00

The Story Behind the Tool

Finishing a cake is often a matter of looking again.

THE FINAL DETAILS

You smooth one area, turn to the next and notice a small edge that needs another pass. The process is easier to understand when the cake can come towards your working hand a little at a time.

A CONTROLLED DECORATING SURFACE

The Loafmora Weighted Cake Turntable is made for that sequence of turning, smoothing and checking. Its broad top gives the cake board a place to sit, while the cast-iron base brings weight beneath the working surface.

You supply the pace with your hand and stop wherever you need to look more closely. From the first crumb coat to a final border, it is a tool for practice, patience and the satisfaction of seeing the finish come together.

Decorating Turning Finishing

Thoughtful Details

01 A broad working platform

The 30 cm top gives a cake board a defined surface. Centre the board and keep its supported footprint in mind.

02 Weight beneath the work

The cast-iron base places mass below the rotating plate. Set the whole stand on a stable, level counter before decorating.

03 Hand-controlled rotation

Turn the plate as far and as slowly as the task requires. The bearing assembly supports the manual movement.

04 A fixed, horizontal height

The top remains level at a 12 cm working height, providing a consistent position for applying frosting and checking the sides.

Made for These Moments

Applying the first crumb coat

Turn the cake gradually while spreading a thin initial coating using a separate suitable spatula.

Smoothing the outside

Work around the sides in controlled sections and pause to inspect the finish before adding more pressure.

Piping a border

Bring each section towards you with gentle hand movement while using your own piping tool.

How to Use

Set

Set the stand on a clean, level worktop and check that the base does not rock.

Centre

Centre a suitably sized cake board on the platform and make sure it sits securely.

Turn

Turn the top gently with one hand while applying frosting with your chosen tool.

Inspect

Pause to inspect the cake from different sides and keep the load centred throughout the work.

Transfer

Transfer the cake with proper support under its board, then wipe and dry the stand.

Size & Fit

The turntable has a 30 cm platform, a 19 cm base and a fixed height of 12 cm. It does not tilt, adjust in height or include a transport cover.

Cake boards, spatulas and piping equipment are separate.

Material

Aluminium top, cast-iron base and internal metal bearing assembly

Colour

Brushed silver top and graphite base

Platform

30 cm diameter

Height / base diameter

12 cm fixed height / 19 cm base diameter

Operation

Manual rotation; fixed horizontal platform

Included

1 assembled turntable

Separate

Cake board, spatulas, piping tools and cover

Care for Your Tool

Wipe clean with a soft damp cloth and dry promptly.

Keep water and food residue out of the bearing assembly and do not immerse the stand.

Follow the supplied maintenance instructions for the axle; do not improvise lubricants around food-contact surfaces.

FAQ

Q1. Does it use electricity?

No. You turn the top by hand. There is no motor, switch or battery compartment.

Q2. Can I change the height or tilt it?

No. The working platform stays horizontal at a fixed 12 cm height. Choose your counter position accordingly.

Q3. Can I put a cake directly on the metal?

Using a suitable cake board makes positioning and transfer more practical. Select a board that sits securely on the platform and supports the cake when lifted.

Q4. Does it include tools or a cake board?

No. The product is the assembled turntable. Prepare your own board, spatula and piping tools for the method you plan to use.

Q5. Is it the same as a display stand with a dome?

No. This is a rotating work stand for decorating. The separate glass stand is a fixed serving piece with a cover; neither is a transport container.

Made with care

Great value

Elegant design

Quality materials

This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.